Shop

Home shop Yamaha Yamaha EMX7 12 Channel

Yamaha EMX7 12 Channel

£860.00

Available on backorder

SKU: YAMEMX7 Category:

Description

Yamaha EMX7 12 Channel

The new Yamaha EMX7 12 Channel was designed specifically for musicians, performers, or public speakers who put a premium on sound quality and convenient operation and are ready to take their sound reinforcement to the next level. Despite their compact construction, only speakers and a microphone are required to configure a fully functioning, extremely portable, and reliable sound system with all the tools you need to mix, process, and deliver your audio just the way you want, anywhere you want.

Product Specifications

  • Inputs: TOTAL 12 channels : 8 Mono (MIC/LINE), 4 Stereo (LINE)
  • Phantom Power: +48 V
  • Outputs: SPEAKERS [A, B], AUX1 SEND, AUX2 SEND, STEREO OUT [L, R], REC OUT [L, R]
  • Control and others: FOOT SWITCH : Effect Mute on/off

Bus

  • Stereo: 1, AUX: 2 (Including FX)

Input Channel Function

  • PAD: 30 dB (CH1-4)
  • Hi-Z: Supported (CH4)
  • HPF: 80 Hz, -12 dB/oct. (CH1–3)
  • COMP: 1-knob COMP (CH1–4)
  • EQ HIGH: 10 kHz +15 dB / -15 dB (Shelving)
  • EQ MID: 2.5 kHz +15 dB / -15 dB (Peaking)
  • EQ LOW: 100 Hz +15 dB / -15 dB (Shelving)

On-Board Processors

  • DSP: SPX Algorithm 24 programs, Feedback suppressor, Graphic equalizer, Speaker processor

On-Board Amplifiers

  • Maximum output power @4ohms: 1kHz THD+N less than 10% (CEA2006) : 710 W + 710 W, 1kHz THD+N less than 1% (CEA2006) : 600 W + 600 W
  • Maximum output power @8ohms: 1kHz THD+N less than 10% (CEA2006) : 500 W + 500 W, 1kHz THD+N less than 1% (CEA2006) : 400 W + 400 W

Level Meter

  • 2 × 12 points LED meter (-30, -25, -20, -15, -10, -6, -3, 0, +3, +6, +10, PEAK)

Frequency Response

  • Input to SPEAKERS : +1 dB/-3 dB (40 Hz to 20 kHz), Input to STEREO OUT, AUX1 SEND, AUX2 SEND : +0.5 dB/-1 dB (20 Hz to 20 kHz) , refer to the nominal output level @ 1 kHz

Total Harmonic Distortion

  • Input to SPEAKERS: MIC/LINE =LINE (CH1–4): 0.1% @ 10 W (40 Hz to 20 kHz), 0.04% @ 65 W (1 kHz) ; Input to STEREO OUT, AUX1 SEND, AUX2 SEND: MIC/LINE =LINE (CH1–4): 0.02% @ +14 dBu (20 Hz to 20 kHz), 0.007% @ +20 dBu (1 kHz), (THD+N, measured with 22 kHz LPF)

Hum & Noise Level

  • Equivalent input noise: -117 dBu (Noise is measured with A-weighting filter)
  • Residual output noise: Input to SPEAKERS : -70 dBu(40Hz to 20kHz, STEREO MASTER LEVEL: min); Input to STEREO OUT, AUX1 SEND, AUX2 SEND : -82dBu(20Hz to 20kHz, STEREO MASTER LEVEL: min) (Noise is measured with A-weighting filter)

Crosstalk

  • -85 dB (1 kHz, Measured with 1 kHz band pass filter)

Protection Circuit

  • Load protection: DC-fault
  • Amplifier protection: Over heat protection, Over current protection, Integral power protection
  • Power supply protection: Over heat protection, Over current protection

Power Requirements

  • AC 100-240V, 50Hz/60Hz

Power Consumption

  • 45 W (Idle) / 250 W (1/8 Power)

Physical & Dimensions

  • Height: 308mm
  • Width: 465mm
  • Depth: 325mm
  • Weight: 9.5kg

Related products