Description

Shure PGX14/93 UHF 4Ch Levalier System with WL93 Lapel Mic CH70

• Multi-color LED indicating power, lockout, mute and low battery
• 92m operating range
• Use up to 8 systems simultaneousy
• PGX4 has XLR and unbalanced 1/4 inch jack audio outputs
• More than eight hours of continuous use with two AA batteries
• Carrying case included in every system

Simply press the channel button on the front of the receiver and it will perform a quick scan of the area and select a clear frequency to avoid any unwanted interference. Once this is done, sync up the receiver with your transmitter by pressing the sync button on the receiver and pointing the infrared port on the transmitter at the receiver. A maximum of 8 musicians can use PGX Wireless systems in parallel. One wireless system consists of one bodypack transmitter and one receiver.

Product Specifications

• Compatible systems per frequency band (up to): 8
• Selectable frequencies: 90
• Auto Setup Features: Scan/Sync
• Audio Reference Companding: Yes
• Included Antennas: Attached 1/4-wave
• Antenna Options: No
• Receiver Network Ability: No
• PC Control: No
• Rack Hardware: Optional (URT)
• Case: System Case
• Transmitter Display: Multi-color LED
• Receiver Display: Multi-color LED
• Battery, Endurance: 2AA, >8 h
• Environment: Small to medium stages

Further Technical Specs

• Working Range: 100m (300 ft.)
• Note: actual range depends on RF signal absorption, reflection, and interference
• Audio Frequency Response: +/– 2 dB,  Minimum: 45 Hz
• Maximum: 15 kHz (Overall system frequency depends on microphone element.
• Total Harmonic Distortion
• Ref: +/– 33 kHz deviation, 1 kHz tone  0.5%, typical
• Dynamic Range: >100 dB A-weighted
• Operating Temperature Range: –18°C (0°F) to +50°C (+122°F)
• Note: battery characteristics may limit this range
• Transmitter Audio Polarity: Positive pressure on microphone diaphragm (or positive voltage applied to tip of WA302 phone plug) produces positive voltage on pin 2 (with respect to pin 3 of low impedance output) and the tip of the high impedance 1/4-inch output.

PGX1 Bodypack Transmitter

• Audio Input Level: –10 dBV maximum at “mic” gain position +10 dBV maximum at 0dB gain position +20 dBV maximum at –10dB gain position
• Gain Adjustment Range: 30 dB
• Input Impedance: 1 MΩ
• RF Transmitter Output: 30 mW maximum (dependent on applicable country regulations)
• Dimensions: 108 mm H x 64 mm W x 19 mm D (4.25 x 2.50 x 0.75 in.)
• Weight: 81g
• Housing: Molded polycarbonate case
• Power Requirements: 2 “AA” size alkaline or rechargeable batteries
• Battery Life: >8 hours (alkaline)

PGX2 Handheld Transmitter

• Audio Input Level: +2 dBV maximum at –10dB position –8 dBV maximum at 0dB position
• Gain Adjustment Range: 10dB
• RF Transmitter Output: 30 mW maximum (dependent on applicable country regulations)
• Dimensions including SM58 cartridge: 254 mm x 51 mm dia. (10 x 2 in.)
• Weight: 290 grams (10.2 oz.) without batteries
• Housing: Molded PC/ABS handle and battery cup
• Power Requirements: 2 “AA” size alkaline or rechargeable batteries
• Battery Life: >8 hours (alkaline)

PGX4 Receiver

• Dimensions: 40 mm H x 181 mm W x 104 mm D (1.6 x 7.125 x 4.1 in.)
• Weight: 327 g (11.5 oz.)
• Housing: ABS
• Audio Output: Level (ref. +/– 33 kHz deviation with 1 kHz tone) XLR connector (into 600 Ω load): –19 dBV 1/4 inch connector (into 3000 Ω load): –5 dBV
• Output Impedance: XLR connector: 200 Ω 1/4 inch connector: 1kΩ
• XLR output  Impedance balanced: Pin 1: Ground (cable shield) Pin 2: Audio  Pin 3: No Audio
• Sensitivity: –105 dBm for 12 dB SINAD, typical
• Image Rejection: >70 dB, typical
• Power Requirements: 12–18 Vdc at 150 mA, supplied by external power supply