Description
LD Systems SP 6K – PA Power Amplifier
The new Audio 3-stage CLASS-H SMPS amplifiers incorporate all the features to meet all your needs, whether you’re starting a P.A. amplifier project from scratch or just need to upgrade your present sound reinforcement equipment. In the amps, you’ll find 2 and 4 channel models, all offering high power levels at low distortion in the range 1.5 to 6 kW, yet weighing around 8.6 kg and only 30 cm deep.
Specifcation.
| Product number: | LDSP6K |
|---|---|
| Product type: | Power Amplifiers |
| Type: | PA Power Amplifiers |
| Rated ouput power (1kHz @ 2 Ohms): | 2 x 2950W |
| Rated ouput power (1kHz @ 4 Ohms): | 2 x 2025W |
| Rated ouput power (1kHz @ 8 Ohms): | 2 x 1250W |
| Rated ouput power (1kHz @ 4 Ohms, bridged): | 3900W |
| Rated ouput power (1kHz @ 8 Ohms, bridged): | 5900lx @ 1mW |
| Output circuitry: | Class H |
| Frequency response: | 20 – 20,000Hz |
| THD: | < 0.05 % |
| Signal-to-noise ratio: | 118dB |
| Damping factor: | > 500 |
| Crosstalk: | >75dB |
| Gain: | 26 / 32 / 38dB |
| Input sensitivity: | 5.0 / 2.5 / 1.3V |
| Protection circuits: | mute when turning on, ICL (Intelligent Clip Limiting), soft start, power supply overload, PMS, short circuit, Open or mismatched loads, thermal protection |
| Controls: | mains switch (on/off), volume, Subsonic Filter 30Hz/50Hz, bridge/stereo mode selector, Subsonic Filter On/Off, dual/link switch, gain, ICL on/off |
| Indicators: | High temperature, signal, PMS, ICL (Intelligent Clip Limiting) |
| Line inputs: | 2 |
| Line input connectors: | XLR |
| Line output connectors: | XLR |
| Loudspeaker outputs: | 2 |
| Speaker output connections: | Speakon |
| Cooling: | 2 fans, temperature controlled |
| Operating voltage: | 230 V AC, Switching Power Supply, 220 V AC – 240 V AC, 50-60 Hz |
| Width: | 483mm |
| Height: | 88.9mm |
| Depth: | 310mm |
| Weight: | 8.6kg |
